Filter clean
The $89 filter clean was money well spent. They wrote the clean pressure on the filter so I know when it is actually due. Took a week to get on the route in June, which is fair for June.
Robert K.Winter Park · 6 months ago on Google
Pool tile and surface repair in Winter Park
Calcium line, loose tile or a surface at the end of its life. We tell you which one it is.
Signs you need it
When to call about tile & surface
A white crust at the waterline
Calcium scale from hard water and high pH.
Tile that sounds hollow
A bond failure behind the tile.
Rough underfoot
Worn or etched plaster, sometimes only in one spot.
How we do it
The honest version of tile & surface
The calcium line is chemistry, not dirt
Scale at the waterline comes from hard water and high pH. It cleans off, and it comes back unless the water is corrected. We do both, or we tell you it’s coming back.
Loose tile is usually a bond failure
Tapping along the line finds hollow sections. Re-setting a run of tile is a repair; a surface delaminating over a wide area is not, and the difference is audible.
When resurfacing is genuinely due
Exposed aggregate underfoot, spreading spalling, or a surface that no longer holds chemistry. Rough underfoot in one patch is a patch.
Step by step
What happens on the visit
Tap-test the tile line
Hollow sections are marked.
Scale or stain?
The chemistry tells us which.
Clean or reset
The right fix for what we found.
Correct the water
So the line doesn’t come straight back.
What it costs
What decides the price
No surprise lines. Every job is quoted in writing, and nothing is done until you reply.
What we look at
- How much of the tile line is scaled
- The number of loose or hollow tiles
- Whether the water chemistry needs correcting too
How you’re quoted
In writing, with the reading or the pressure that made us recommend it. Approve all of it, some of it, or none of it.
Every tile or surface job is quoted in writing after we’ve tapped and tested, before any work starts.
Reviews
What customers say about our tile & surface
4.9Average across 212 reviews on Google
Weekly service
Luis has been on our pool every Thursday for two years. The report is on my phone before his truck is out of the driveway, and I finally understand why the chlorine kept vanishing: stabilizer was at 90. They told me to drain a foot instead of selling me more shock.
Karen D.Winter Park · 3 weeks ago on Google
Straight answers
Tile & surface: questions
How do you remove calcium from pool tile?
It’s cleaned off the tile, and then the water is corrected so it stops re-forming. Cleaning alone just resets the clock.
When does a pool need resurfacing?
When aggregate is exposed underfoot, spalling is spreading, or the surface no longer holds chemistry. A rough patch in one spot is a patch.
Can loose tiles be reset?
Yes, when the problem is a local bond failure. We tap the whole line first so you know how far it goes.
Get a straight answer about your pool.
Tell us what it is doing. If it can wait, we’ll say so, and if it can’t, we’ll say that too.